SUTD researchers sustainably 3D print large-scale objects out of cellulose

//SUTD researchers sustainably 3D print large-scale objects out of cellulose

SUTD researchers sustainably 3D print large-scale objects out of cellulose

Researchers from the Singapore University of Technology and Design (SUTD) have recently demonstrated the use of cellulose to 3D print large-scale objects. Their approach is inspired by the wall of the fungus-like oomycetes, which is reproduced by introducing small amounts of chitin between cellulose fibers. The resulting fungal-like adhesive materials (FLAM) are strong, lightweight and inexpensive, and can be molded or processed using woodworking techniques.

1.2m, 5.2kg turbine blade fabricated entirely with cellulose and chitosan. Credit: SUTD

Cellulose is one of the most abundant and broadly distributed organic compound and industrial by-product on Earth. However, despite decades of extensive research, lack of scalability and high production cost are two of the issues that restrict the use of cellulose as a 3D printing material.

The fungal-like adhesive material developed by SUTD researchers is said completely ecologically sustainable as no organic solvents or synthetic plastics were used to manufacture it. It is scalable and can be reproduced without specialised facilities. FLAM is also fully biodegradable in natural conditions and outside composting facilities.

It is further claimed that the cost of FLAM is in the range of commodity plastics and 10 times lower than the cost of common filaments for 3D printing, such as PLA (polylactic acid) and ABS (Acrylonitrile Butadiene Styrene). The researchers have furthermore developed an additive manufacturing technique specific for the material.

Co-lead of this research, SUTD Assistant Prof Javier Gomez Fernandez, also known for the development of Shrilk said: “We believe this first large-scale additive manufacturing process with the most ubiquitous biological polymers on earth will be the catalyst for the transition to environmentally benign and circular manufacturing models, where materials are produced, used, and degraded in closed regional systems. This reproduction and manufacturing with the material composition found in the oomycete wall, namely unmodified cellulose, small amounts of chitosan — the second most abundant organic molecule on earth — and low concentrated acetic acid, is probably one of the most successful technological achievements in the field of bioinspired materials.”

Co-lead SUTD Assistant Prof Stylianos Dritsas, added: “We believe the results reported here represent a turning point for global manufacturing with broader impact on multiple areas ranging from material science, environmental engineering, automation and the economy. So far we have been focusing on fundamental technology development, and little time has been invested in specific target applications. We are now at the stage of seeking industrial collaborators to bring this technology from the laboratory to the world.”

With the increase in waste and pollution, the urgency for more sustainable manufacturing processes is growing. The establishment of a technology based on unmodified compostable polymers of great abundance that does not require cropland or forest resources, will foster the transition to environmentally benign manufacturing and a sustainable society.

This research was published in the 5th June edition of the journal Scientific Reports.

By | 2018-07-23T12:41:34+00:00 June 7th, 2018|Uncategorized|Comments Off on SUTD researchers sustainably 3D print large-scale objects out of cellulose

About the Author:

Have Questions? Ready to Talk? Contact Us

Powered by AmericanEagle.com